馬上註冊,結交更多好友,享用更多功能,讓你輕鬆玩轉社區。
您需要 登錄 才可以下載或查看,沒有賬號?註冊
x
本文章最後由 6hzzz 於 2017-12-16 01:16 編輯
匯總一下Q10PRO Android 5.1 升7.0相關資訊,希望對有需求的人有幫助.
官方http://www.himediatech.com/support.htm給出的:
先刷:
Q10 Pro
(Android L to Android N) | HMD-2.0.4 2017-07-05.191425 | 720M |
|
再刷:
Q10 Pro
(Android N to Android N) | HMD-2.0.6 2017-10-25.164125 | 636M |
|
http://www.mediafire.com/file/sgwbfs3gqnduwf7/update.zip for Q10 Pro is used to upgrade from Android L OS to Android N 2.0.4 (Android L to Android N)
Firmware Upgrade by Recovery Mode (user data will be cleared)1.Download a new firmware and place the firmware onto the ROOT directory of a USB drive. 2. Plug the USB drive into an empty USB HOST on the SMART TV BOX. 3.With the SMART TV BOX turned off,use a paper clip or pen point to press and hold the small pinhole restore button on the SMART TV BOX 4.While pressing the restore button,turn on the SMART TV BOX. Continue to hold the restore button for 5 more seconds,then release it. 5.The SMART TV BOX will begin upgrading the firmware from the USB drive. 6. Wait for the SMART TV BOX to complete the upgrade. Please be patient as it may take around 5 minutes to complete. 7. When finished, The SMART TV BOX will auto reboot.
刷機方法:
強刷模式:
拷貝第一個包update.zip(HMD-2.0.4 2017-07-05.191425)到USB隨身碟根目錄,插到機器左邊第一個USB2.0口.
頂住機器後面的UPGRADE/restore小按鈕後,通電開機,直到看到刷機畫面鬆手.正常升級的情況下耗時大約5分鐘左右.
升到2.0.4後,再採用同樣的方法升到最新的2.0.6(HMD-2.0.6 2017-10-25.164125).
www.futeko.com給出的:
Migrate from Android 5.1 to Android 7
1. Extract update.zip (using an unzip program like 7zip, winzip etc) from Q10_PRO_ANDROID_5.1_TO_ANDROID_7_MIGRATION_FIRMWARE.zip to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip').
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will show the Android 5.1 green droid upgrade logo.
6. When you see the Android 5.1 green droid logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into Android 7 migration firmware. Allow boot to complete.
Download: http://www.mediafire.com/file/r55t37rs732033s/Q10_PRO_ANDROID_5.1_TO_ANDROID_7_MIGRATION_FIRMWARE.zip
Q10 PRO RUNNING ANDROID 5.1 FIRMWARE VERSION 1.0.7 - 1.1.0: http://www.mediafire.com/file/bzd7e7vi9bbwz6a/Q10_PRO_FIRMWARE._ANDROID_5.1_TO_ANDROID_7_v2.0.4._FUTEKO._HMD-2.0.4_2017-07-05.191425.zip
刷機方法
先要解壓出update.zip刷機包,其餘跟官方刷機方法一樣.
僅適用Q10PRO版,大陸版Q10四代跟Rocktek版 Q10 Pro都不能刷.如果刷官方包不成功,就試試futeko的包吧. |