Panasonic AE-7000 預計九月上市
本文章最後由 ai_0301 於 2011-7-30 13:16 編輯Panasonic 3D projector ......... 預計九月上市
亮度 2000 流明 > 3D 的加分項目
movie 2.35:1 aspect ratio > 3D 再加分
Dual processor480Hz > 3D 加分項目
對比 300K :1
2D/3D conversion,Lens shift .....etc
規格, 價格粉吸引人ㄉ一台 3D Projector ! 鼓掌=
The optical system of the PT-AE7000U features a new 200-Watt Red-Rich Lamp and new LCD panels with larger aperture ratio for increased red luminance and brightness output. The combination of fully-optimized Pure Contrast Plates, Pure Color Filter Pro and Dynamic Iris Pro has resulted in a 300,000:1 contrast ratio and 2,000 lumens of brightness. This produces brighter images with excellent coloring and deep blacks with fine shadow details.The PT-AE7000U uses frame sequential technology for 3D image projection. The Overdrive Technology has been carefully tuned together with the 480Hz LCD Panel that greatly reduces 3D crosstalk, or double images, for comfortable 3D content viewing. The projector is also equipped with a newly-developed dual-core processing engine so that the projector can process 3D signals with all of the benefits of 2D image enhancements. Frame Creation, Detail Clarity Processor and other innovative image processing technologies are optimized for 3D images in the same manner as for 2D images. They bring out fine details and three dimensionality for natural, life-like visuals with excellent clarity, and create sharp, clear images of fast-moving scenes in sports and action movies. Comfortable 3D viewing can also be adjusted with the 3D Viewing Monitor and the 3D Picture Balance features. Because the 3D effect changes with varying screen sizes, the 3D Viewing Monitor ensures that the viewer’s stereoscopic effect is within the safety zone set forth by the 3D Consortium Committee. The left and right eye images can be displayed side by side on the PT-AE7000U with the individual Waveform Monitor to adjust 3D picture balance. Other 3D features include 2D-3D Conversion, which converts 2D content into 3D images for 3D projection with five different 3D effect modes. The projector is equipped with a built-in 3D IR transmitter that lets the user enjoy large-screen 3D images with optional eyewear, which is sold separately. The models, TY-EW3D10U, TY-EW3D2LU, TY-EW3D2MU and TY-EW3D2SU, also used for the Panasonic VIERA 3DTV, are convenient for those looking to enjoy 3D content on both their Panasonic TVs and projectors. An optional IR transmitter (ET-TRM110) is available for extended transmission distance.The PT-AE7000U comes rich with features for those looking to customize their home theaters. Many Blu-ray Discs and DVDs come in aspect ratios that are even wider than the projector’s 16:9 aspect ratio to match the image size (2.35:1) seen in movie theaters. The projector’s Intelligent Lens Memory feature makes it possible for the user to easily program up to six different zoom/focus positions. Automatic switching between 16:9 and 2.35:1 video content is also possible thanks to the signal aspect detection capability on the PT-AE7000U.More theater automation, such as lighting and a motorized screen, is possible with the PT-AE7000U because it comes equipped with two programmable 12-volt trigger terminals and VIERA Link®. VIERA Link® provides seamless operation of multiple VIERA Link® compatible Panasonic devices by using the PT-AE7000U remote control with backlit buttons. The PT-AE7000U is also equipped with three HDMI™ inputs (supporting x.v.Color™ and Deep Color), so multiple HD sources can be connected without an HDMI switcher. Initial setup and installation are quick and easy, because the 2x zoom can cast a 120-inch diagonal image from as close as 3.6 meters (about 11 feet) to 7 meters (24 feet) from the screen. The projector’s lens shift capability enables 100 percent vertical adjustment and 26 percent horizontal adjustment, so the user can suspend the projector either close to the ceiling or mount it to a wall.
In addition to its outstanding features, the new PT-AE7000U is also an eco-conscious product. Its intelligent power management system reduces the lamp power to the exact required level of brightness depending on the content being displayed. Advanced Panasonic digital circuitry intelligently determines the necessary power output by analyzing more than 3 billion different image patterns. This advanced analysis process reduces the main power consumption by as much as 10 percent when the Dynamic Iris function is operating, thus saving energy.
Other ecological considerations include an off-timer that reduces wasteful power consumption, an extremely low standby power consumption of 0.08 watts, and a 4,000 hour (normal mode)/5,000 hour (eco mode) lamp life.The Panasonic PT-AE7000U Full HD 3D home theater projector is made in Japan and will be available in September 2011, through authorized Panasonic resellers, at an MSRP of $3,499.00. 看標題我還以為 ai_0301 拿到手了!!
我幫你把標題改了一下了。 這一台宅爸可以等上 1~2Q , 讓現役 AF-115 多利用一陣子 :)>-
另一新款Philips 50PFL7956K 這一台 21:9 偏光式 3D TV(價格約與 Panasonic VT-30 同級)
考慮先敗入說 :-B 我的AE-4000才用一年多
AE-7000就要出來了
我得再忍一陣子才能再換機 ~~~~~=P~ 大家手上的 Full HD projector 都還算新, 可以等一陣子
讓這些 3D projectors 開始拼價格戰 再進場 :)>- 真是令人期待的一部投影機，只是不知道引進到台灣還要等多久時間? 看過先知好唔好 LCD有D補留 美規型號Panasonic PT-AE7000U已有國外網站開始預購(Pre-order)。
網站上也是寫預計在9月份可以開始寄送。
該網站有提供較清楚的規格與基本的功能介紹說明(英文)，有興趣者可以參考一下：
http://www.projectorpeople.com/projectors/projdtls.asp?itemid=26756&itmname=Panasonic+PT-AE7000U 台灣代理商不知何時會引進,價格要15萬以上吧! 可以考慮辦個團購 ...... =P~ 可以考慮辦個團購 ......
ai_0301 發表於 2011-8-12 17:43 http://www.hd.club.tw/images/common/back.gif
這還要再看看實機表現啦。
3D投影機最重要的亮度表現與CROSS TALK現象處理的如何，都是3D投影的重要因素。
目前是只有國外辦過原廠的展示會。
國外各評測網站還沒有自家的評比或比較文章。
另外對該機現有的詳細規格及支援度等，國外網站有提供2大頁的SPECS SHEET，有興趣的人可以參考一下：
http://www.projectorreviews.com/pdfdocuments/panasonic-ae7000u.pdf 覺得鏡頭改到側邊,真不習慣
鏡頭在中間比較順眼 看到德昌網站上開賣 AE-7000, NT$129,000
請問有前輩入手了嗎 ? 德國網站有搶鮮試用報告，不過是德文.....
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A.htm
AE7000各種角度(以下所有照片取自cine4home.de)
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image003.jpg
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image011.jpg
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image012.jpg
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image017.jpg
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image024.jpg
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image026.jpg
新的螢幕OSD
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image029.jpg
搖控器沒變(舊的已經很好用)
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image030.jpg 本文章最後由 terry 於 2011-9-14 12:29 編輯
AE7000/5000 "Cinema 1"畫質模式預設值的實測色域圖
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image036.jpg
Cinema 1模式的RGB色溫實測圖
http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image038.jpg Pnasonic終於換下從AE100 以來萬年不變的造型 , 雖說有進步但還是一貫的松下保守風格 http://www.cine4home.de/tests/projektoren/Panasonic_PTAT5000/AT5000_Test_A_clip_image003.jpg
這偏向一邊的鏡頭，加上鏡頭offset調整範圍從以前的50%降至25%，不曉得原本的吊架還能不能用..... 夭壽。 回覆 14# terry
從照片中來看，這台投影機還是有濾網的設計。
想一想DLP機種的設計還是不錯，不用花心思要定期清濾網，也不用對於入塵等問題太過擔心。 這偏向一邊的鏡頭，加上鏡頭offset調整範圍從以前的50%降至25%，不曉得原本的吊架還能不能用..... 夭壽。 ...
artist1128 發表於 2011-9-20 15:59 http://www.hd.club.tw/images/common/back.gif
相對整個螢幕畫面尺吋來說，鏡頭由中間改至右側的位置設計，鏡頭中線的位移距離比例上來說是很小的數值吧。
我想您只要確認該投影機在吊投時的垂直投射範圍即可。 回覆terry
從照片中來看，這台投影機還是有濾網的設計。
想一想DLP機種的設計還是不錯，不用花心思要定 ...
len1978 發表於 2011-9-20 18:17 http://www.hd.club.tw/images/common/back.gif
不過Panasonic已公開向媒體表示，AE7000/5000的投影核心元件D9 3LCD panel與光學路徑已經密封，基本上不會出現長期困擾LCD投影機的進塵問題。
頁:
[1]
2