小子 發表於 2012-11-25 17:14:21

kmp 輸入與輸出的解像度不符?



是編碼器 coreavc問題 還是 kmp設定問題呢??? 畫面起格都頗大
怎樣設定才可以輸出 1920x1040?
coreavc是3.0.1 kmp是3.2.0.19

=崇拜=

E:\Ruby.Sparks.2012.LIMITED.1080p.BluRay.X264-AMIABLE \Ruby.Sparks.2012.LIMITED.1080p.BluRay.X264-AMIABLE.mkv
   General
      Complete name : E:\Ruby.Sparks.2012.LIMITED.1080p.BluRay.X264-AMIABLE \Ruby.Sparks.2012.LIMITED.1080p.BluRay.X264-AMIABLE.mkv
      Format : Matroska
      Format version : Version 2
      File size : 7.65 GiB
      Duration : 1h 44mn
      Overall bit rate : 10.5 Mbps
      Writing application : mkvmerge v4.1.1 ('Bouncin' Back') built on Jul3 2010 22:54:08
      Writing library : libebml v1.0.0 + libmatroska v1.0
   Video #1
      ID : 1
      Format : AVC
      Format/Info : Advanced Video Codec
      Format profile : [email protected]
      Format settings, CABAC : Yes
      Format settings, ReFrames : 4 frames
      Codec ID : V_MPEG4/ISO/AVC
      Duration : 1h 44mn
      Bit rate : 9 013 Kbps
      Width : 1 920 pixels
      Height : 1 040 pixels
      Display aspect ratio : 16:9
      Frame rate : 23.976 fps
      Color space : YUV
      Chroma subsampling : 4:2:0
      Bit depth : 8 bits
      Scan type : Progressive
      Bits/(Pixel*Frame) : 0.188
      Stream size : 6.40 GiB (84%)
      Writing library : x264 core 128 r2216 198a7ea
      Encoding settings : cabac=1 / ref=4 / deblock=1:0:0 / analyse=0x3:0x113 / me=umh / subme=8 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=2pass / mbtree=1 / bitrate=9013 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00
      Language : English
      Default : Yes
      Forced : No


B4K 發表於 2012-11-26 10:53:41

只有這部片這樣, 還是所有的片都一樣?

IcareU 發表於 2012-11-26 13:17:43

改用 potplayer 就好了

小子 發表於 2012-11-26 19:36:10

本文章最後由 小子 於 2012-11-26 19:45 編輯

B4K 發表於 2012-11-26 10:53 static/image/common/back.gif
只有這部片這樣, 還是所有的片都一樣?
幾套片子都是一樣............


解決了!!
原來不知何時在設定內選了重設尺寸 :-O 重選無動作即ok了

小子 發表於 2012-11-26 19:54:58

還有一個小問題
不知為何
coreavc無法硬解
片源不是avc格式嗎? 但顯示mpeg2?
頁: [1]
查看完整版本: kmp 輸入與輸出的解像度不符?