100% normal, I guess your TV resolution has higher resolution than your PC's screen when playing on the full screen mode.
原帖由 wellkemp 於 2010-3-29 16:02 發表 http://www.hd.club.tw/images/common/back.gif
剛剛看了potplay的介紹來播放 CPU使用率大概在24~30% (在電腦) 把影片拉到 電視播 CPU 大概會在50~60%上下 這也正常嗎
have any chance to reduce cpu %.. because it seems a little delay when iplay on LCD TV.
設定之後發現CPU使用率有點高，25%左右。我使用的是I5 2.93GHz。照理講硬碟應該沒這麼高的CPU使用率，感覺似乎是軟解?
Please simply tell us what type of Windows OS and PC hardware spec you are using to play HD content.
Lots of experts will be willing to give your advise here.
原帖由 wellkemp 於 2010-3-29 16:52 發表 http://www.hd.club.tw/images/common/back.gif
have any chance to reduce cpu %.. because it seems a little delay when iplay on LCD TV.
Sounds abnormal to me too, please make sure the lastest display card driver was installed on your Win7. The default DXVA should be always on in Win7's DTV-DVD video decoder if display driver is certified by Win7
原帖由 poppyplus 於 2010-3-29 19:49 發表 http://www.hd.club.tw/images/common/back.gif
設定之後發現CPU使用率有點高，25%左右。我使用的是I5 2.93GHz。照理講硬碟應該沒這麼高的CPU使用率，感覺似乎是軟解?
系統: Windows 7 (Win7codecs_v245)
系統: Intel(R)Core(TM)2 CPU 6400 @2.13GHz
顯卡: ATI Radeon HD 4650 (i install this driver:10-3_vista32_win7_32_dd_ccc_wdm_enu)
記憶卡: 2G
PotPlayer v1.4.20877
please see the picture, a little different from yours. the codes show" Divx H.264 Decorder"
http://img706.imageshack.us/img706/732/333vd.jpg
Which is not correct since the Divx codec is definitely pure software decoder, and Potplayer should call MS DTV-DVD decoder out to do this job. Please import the Potplyer configuration reg that I posted earlier and try again.
原帖由 wellkemp 於 2010-3-30 01:54 發表 http://www.hd.club.tw/images/common/back.gif
系統: Windows 7 (Win7codecs_v245)
系統: Intel(R)Core(TM)2 CPU 6400 @2.13GHz
顯卡: ATI Radeon HD 4650 (i install this driver:10-3_vista32_win7_32_dd_ccc_wdm_enu)
記憶卡: 2G
PotPlayer v1.4.20877
pleas ...
学习了。VC-1呢？
VC-1 was formerly developped by M$, so its default decoder is MS-DTV/DVD w/o any problem.
原帖由 sr9 於 2010-3-30 13:29 發表 http://www.hd.club.tw/images/common/back.gif
学习了。VC-1呢？
怕黑過頭暗部細節不見嗎?
這裡還有一color bar (沒 balcker than blak), 所以右下部
該有一黑/暗黑/黑/暗黑 交錯直條, 若無, 則要再調校一下LCD display's contrast
[ 本帖最後由 joewang2003 於 2010-3-30 13:41 編輯 ]
原帖由 joewang2003 於 2010-3-30 13:35 發表 http://www.hd.club.tw/images/common/back.gif
VC-1 was formerly developped by M$, so its default decoder is MS-DTV/DVD w/o any problem.
了解了，呵呵。
i run this "Optimized-Config-for-Potplayer-i386.reg"
but the codec still show "Divx H.264 Decorder">___<
=================================
finally i know why codec show" "Divx H.264 Decorder"
because i had installed Win7codecs_v245
when i unstall Win7codecs_v245 the codec show"Microsoft DTV-DVD Video Decoder"
還有另一個問題 我的 音響是5.1聲道 但播放資訊秀 聲道數: 6-> 2 聲道.
要到哪裡調整成5.1聲道呢
[ 本帖最後由 wellkemp 於 2010-3-31 14:01 編輯 ]
Here you are...
原帖由 wellkemp 於 2010-3-31 13:38 發表 http://www.hd.club.tw/images/common/back.gif
i run this "Optimized-Config-for-Potplayer-i386.reg"
but the codec still show "Divx H.264 Decorder">___<
=================================
finally i know why codec show" "Divx H.264 Decorder"
bec ...
有时间试试看，谢谢
Good news, need to consider upgrade OS to Win7 :-)
Right move, you won't regret
原帖由 2266-8086 於 2010-3-31 22:07 發表 http://www.hd.club.tw/images/common/back.gif
Good news, need to consider upgrade OS to Win7 :-)
原帖由 joewang2003 於 2010-3-31 17:22 發表 http://www.hd.club.tw/images/common/back.gif
Here you are...
謝謝已經設定成功..
我的1201n有求LA
有試過HIHD的錄影檔要如何設定嗎?
as long as ION's latest driver for Win7 was installed, the hardware decoder will function normally.
原帖由 EXIAZERO 於 2010-4-2 13:47 發表 http://www.hd.club.tw/images/common/back.gif
我的1201n有求LA