解決 TotalMedia Theatre 跳出 Aero 介面修補檔
本文章最後由 jack-lau 於 2010-6-20 19:55 編輯1. This is BETA testing. Use at your own risk.
2. Be sure to back up the original file before replacing it. You may need it again, particularly if you need to contact Customer Service about something.
3. One of the reasons Aero is turned off is due to performance issues on some systems. If you turn it on and have performance issues, well... yeah. Don't report any performance issues to Customer Service with this file installed. They will not be able to help, and you'll just create confusion. Restore the older version of the file, verify the problem persists, then report the issue.
4. This file is set up for TMT3 Platinum retail version 180 only. If you install it in any other version the results may be unpredictable, and if you choose to try it anyway any mention of it here will result in the post being deleted to avoid confusion.
5. Feel free to discuss your experiences and any problems you have with Aero enabled in this thread.
If you're interested in participating after reading the above the linked file should result in TMT never dropping out of Aero on Win7 and Vista systems.
官方修補檔下載連結
http://www.arcsoft.com/downloads/digitaltheatre/arcsoft/aero_fix_180_beta.zip
Place the file in this ZIP file in your TMT folder under:
\Plugins\VideoModule\PlayDVD\
After backing up the older version of the file, overwrite it with the new version.
--------------------------------------------------------------------------------------
須然是BETA版, 但我測試完, 是成功的~~
目前只適合最新的TMT3 ~ 180版使用.
有用TMT的朋友可以下載來用~
解壓在以上高光的安裝目錄就可以.
用之前先將原有檔案改名~以防萬一
官方連結
http://www.arcsoft.com/Forum/forum_posts.asp?TID=6055&title=enable-aero-in-tmt-180-public-beta 修補檔更新後真的可正常在Aero下執行TMT3,感謝提供 本文章最後由 ikmlop 於 2010-6-20 22:08 編輯
真是太好了，每次看螢幕在那邊閃真是討厭。
另外我的版本是1.170的也ok 修補後真的不會閃了耶~~~感謝大大的提供 真棒！ 這下子以後就不用看那討厭的視窗了
頁:
[1]