34# jacky_3977
遙控器 mode + 1, 2, 3, 4 可快速設定內建的解析度, 您可先嘗試變換設定是否改善!
不知道大家有遇到相同的問題嗎?
我這兩天發現有時後輕按電源鍵，機器面板上會出現待機文字，但是等過了一個晚上(或是幾個小時後)再按電源鍵之後.....居然是變成開機.......這樣不是都沒下載到東西(之後再啟動BT的時候，種子放了半天也停留在動作中....並沒有在下載，前一天晚上還有在下載的說...沒想到輕按了電源鍵之後，變成關機!!).........不知道大家有遇過同樣的問題嗎?
還有....如果很久都停留在動作中....意思是不是就要我砍掉然後重新來過~~~
本文章最後由 len1978 於 2011-2-1 01:41 編輯
我現在有遇到一個問題：
資料光碟放入DUNE裡面作檔案複製到MAX內的硬碟，可以正常複製。
並且畫面停留在MAX硬碟的目錄時，然後我換另一片資料光碟，結果畫面停了好一陣子，然後我可以回到主畫面，但是光碟機的退出鍵失效了(機器上的按鈕跟遙控器都是)!!
後來再重開機還是不能恢復...光碟機顯示NO DISK，但是裡面有一片資料光碟在=.=
現在打算重裝韌體試試看...
現在裝的這個韌體版本(dune_firmware_hdmax_100916_2027_beta.dff)是不是不太穩定啊?
是否先裝回上一個版本100828_0034_update1比較好呢..
-------------------
搞了快2小時，剛剛重開機後準備裝上一個版本時，MAX又認得那片資料光碟，然後光碟退出鍵又恢復正常了..。
我明天再試試看放DVD光碟試試看，看看會不會遇到同樣的問題好了。
不知道大家有遇到相同的問題嗎?
我這兩天發現有時後輕按電源鍵，機器面板上會出現待機文字，但是等過了一個晚上(或是幾個小時後)再按電源鍵之後.....居然是變成開機.......這樣不是都沒下載到東西(之後再啟動BT的時 ...
joe0926168968 發表於 2011-2-1 00:54 http://www.hd.club.tw/images/common/back.gif
我覺得這個版本的韌體還不夠穩定，您要使用BT的話，機器就不要設為STANDBY。
中文說明書最後寫到待機<1W，應該是指關機後不拔掉插頭/不關掉後面電源開關的情況下，消耗功率會小於1W，而不是指進入STANDBY MODE時會小於1W。
MAX附的中文手冊上有寫到，STANDBY模式只是關閉影像輸出，實際上機器的操作功率跟一般模式相同(看說明是最大60W)。所以要用這台跑BT的話，不如就讓機器開著跑吧。
剛剛安裝完System Storage後，原本在主畫面增加捷徑(add to main screen)的功能就能用了。
但不知這台機器還有什麼其他功能，希望neuHD大有機會能多作些介紹喔~
另外控制介面仍然有待改善，不要一半是大陸式翻譯，另一半是英文，看起來總覺得不舒服。
有沒有方式可以把控制介面的說明全改為英文啊??
本文章最後由 len1978 於 2011-2-1 02:57 編輯
剛剛安裝完System Storage後，原本在主畫面增加捷徑(add to main screen)的功能就能用了。
但不知這台機器還有什麼其他功能，希望neuHD大有機會能多作些介紹喔~
另外控制介面仍然有待改善，不要一半是大陸式翻譯， ...
len1978 發表於 2011-2-1 02:40 http://www.hd.club.tw/images/common/back.gif
自問自答..DUNE 的英文官網有介紹了：
http://dune-hd.com/firmware/
USB Flash Drive (System Storage)- System Storage USB flash drive usage with Dune Blu-ray players.
Torrent Client- how to use built-in torrent client with Dune players.
Web Browser- how to use built-in web browser with Dune players.
Internet Radio- how to use Internet radio feature with Dune players.
IPTV- how to use IPTV feature with Dune players.
Remote Control- information about infrared Remote Control used with Dune players, IR HEX codes, etc.
Languages- how to create and use custom translations of the user interface of Duneplayers.
Hardware Compatibility- notes on hardware compatibility for Dune players.
Misc- miscellaneous useful stuff for Dune players.
----------------
看了一下Languages的說明頁，看來控制介面的說明(語言)是可以自已編輯和自定義的。
42# joe0926168968
如果要用bt, 電源鍵不用關囉...因為standby與運作中耗電差不多!!!樓下len1978說的一樣, 中文說明書也有提到!!
如果關掉了, 請把種子砍掉重練!!
43# len1978
不要裝回100828_0034_update1啦...前版本pgs字幕處理有問題...看到會哭的.
拷貝完要稍等些時間. 通常這種不會馬上退片的, 大抵都是燒錄片, 要更長時間作讀取. 弟自己試也是一樣...多等個20~30s 讓Max完成退片動作即可!
45# len1978
設置的地方(高級設置?)有選項可改系統語言, 看不習慣就請先全改成英文先!
介面中文化正處理中, 如有進度會先發給各位團購的大大!!
年假時得陸續作功能與討論區首頁整理的工作囉,,,
neuHD大感謝您用心回覆.
沒有用過.以為只是單純按下BT下載即可獲得資訊.
43# len1978
不要裝回100828_0034_update1啦...前版本pgs字幕處理有問題...看到會哭的.
拷貝完要稍等些時間. 通常這種不會馬上退片的, 大抵都是燒錄片, 要更長時間作讀取. 弟自己試也是一樣...多等個20~30s 讓M ...
neuHD 發表於 2011-2-1 10:31 images/common/back.gif
感謝回覆，原來是機器還在進行確認的關係。
45# len1978
設置的地方(高級設置?)有選項可改系統語言, 看不習慣就請先全改成英文先!
介面中文化正處理中, 如有進度會先發給各位團購的大大!!
年假時得陸續作功能與討論區首頁整理的工作囉,,, ...
neuHD 發表於 2011-2-1 10:35 http://www.hd.club.tw/images/common/back.gif
這個我沒找到設定的地方，晚上我再玩看看，謝謝您的熱心!!
50# jgrquest
弟等會會用悄話寄網路上相關的bt教學給您看!
因Max只是建有bt下載的程式, 並不是連些到特定平台專門的bt機, 因此外部種子的pc搜尋與Max上傳仍是需要的唷!!!
熱騰騰 Dune HD Max 新版的韌體發佈囉!
先貼原廠原文的修正!!
Dune HD Max
--------------------------------------------------------------------------------
Version "110127_2105_beta" (BETA version, not well tested, may contain critical bugs and broken functionality; not recommended unless you really want to try)
Download: dune_firmware_hdmax_110127_2105_beta.dff (ZIP)
Changes since 101201_1626:
* Various playback improvements.
- Bugfix: Specific MP3 files were playing with distortions when played
during photo viewing).
- Bugfix: Specific AVI files with AC3 audio were playing without sound,
and no file with audio could be played afterwards.
- Bugfix: Specific AVI files with H.264 video were not playing, and no
other video file could be played afterwards.
- Improvement: unsupported non-LC AAC audio tracks in MKV are not shown
in the list of audiotracks to avoid confusing the user.
- Bugfix: The setting "HDMI audio = disabled" did not work properly in
some cases with some equipment.
- Bugfix: Specific AVI files with AAC audio could not be played
correctly.
- Added support for playback and recorinding of A/V streams based on MMS
protocol (useful for MMS-based Internet Radio and Internet Video
resources).
* Added support for MMS audio/video streaming protocol.
- Useful for MMS-based Internet Radio and Internet Video resources.
- Both playback and recording of MMS streams is supported.
- Usage: launch playback of MMS URL ("mms://...") via .M3U playlist file
or in any other way supported by Dune.
* Volume control improvements.
- Added a new setting "Audio / Volume control" with the following
possible values:
- "Off". Volume control is completely disabled. The volume level is
fixed at 100% (0dB) and the player does not perform any
modifications of the digital audio signal.
- "Best quality". The default setting. The user is allowed to control
the volume in the safe range till 0dB (ensuring no audio
distortions on all audio content). When needed for specific files,
it is also possible to temporarily overcome the 0dB limit by
pressing and holding "V+" RC button for several seconds (the
increase volume level takes effect only for the current playback
session and is automatically reset to 0dB when the playback session
finishes).
- "Allow overload". The setting corresponding to the behavior taking
place in previous firmware versions. The user is allowed to set the
volume to values greater than 0dB. Depending on played content,
this may lead to severe audio distortions and thus is not
recommended.
- Added a new setting "Audio / Volume indication" with the following
possible values:
- "Percents". The default setting. The volume level is shown as
(corresponding to [-48..0dB] range). When the volume
level is set to 100%, the player does not perform any modifications
of the digital audio signal. Overloaded volume level is shown as
(100..150%] (corresponding to (0..+24dB] range).
- "Decibels". The setting corresponding to the behavior taking place
in previous firmware versions. The volume level is shown in
decibels.
- Volume control for background audio during photo viewing is
implemented in the same way as for regular file playback.
- NOTE: As in previous firmware versions, the player can apply volume
control only to PCM audio signal (i.e. when playing PCM audio tracks
or audio tracks which are decoded by the player itself); when using
"bitstream" audio output mode and playing audio tracks supporting
bitstream output, the volume control does not take any affect. When
A/V receiver is used, it is recommended to control the volume using
the A/V receiver.
* Other OSD improvements.
- When performing time navigation using LEFT/RIGHT/UP/DOWN/P+/P- RC
buttons (in file/DVD playback mode), the OSD does not only show the
selected playback position, but also shows the offset from the current
playback position.
- Certain notification OSD elements, such as volume control and certain
information messages can now be quickly hidden by pressing any
non-relevant RC buttons (no need to wait for autohide timeout).
* Added IP Control possibilities (control the player from iPhone etc).
- A simple HTTP protocol allows to control the player from network
(start/stop playback of the given media resources, control the
playback, check current player status, emulate RC button presses,
etc).
- Applications for various devices can be created based on this IP
Control procotol. Several such applications are already announced /
provided (e.g.: applications for iPhone/iPad, integration with
Control4 smart home systems).
- More information: http://dune-hd.com/support/ip_control
* Added new possibilities for authors of FlashLite applications.
- Added ability for FlashLite application to store persistent data in
the flash memory of the player ("persistent SharedObjects").
- Added support for showing specific text message on the front panel
display (for player models having front panel display) on startup of
FlashLite application.
- More information: http://dune-hd.com/support/flash
* Added new UI customization possibilities (for "dune_folder.txt"
applications).
- Added a possibility to load icons shown in the right panel of the
"extended list view" asynchronously. When this feature is enabled,
navigation in such folders becomes much faster.
- Syntax:
- async_icon_loading = yes
- Added "icon_archive" feature, allowing to download a collection of
icons/images from an HTTP server once when entering certain folder,
and cache it in the player (in System Storage), that allows to
significantly improve the performance.
- Syntax:
- icon_archive.{n}.name = {name}
- icon_archive.{n}.url = {HTTP-URL-to-TGZ-archive}
- icon_path = icon_archive://{name}/{file-path-in-archive}
- When a new version of the icon archive is deployed on the HTTP
server, a modified URL should be used for it, then the player will
automatically reload the icon archive next time when the user opens
the folder.
* Setup usability improvements.
- When the user tries to exit "Video" or "Network" setup screen with
unsaved changes, a warning dialog is shown. The user is asked to
either apply the changes, discard the chances, of cancel the action.
- When selecting WiFi network connection type, the WiFI settings dialog
is shown automatically.
- When selecting PPPoE network connection type, the PPPoE settings
dialog is shown automatically.
* Added built-in functions for management of System Storage.
- New Setup page "Miscellaneous / System Storage" provides the following
functions:
- "Initialize System Storage": allows to initialize the system
storage if it is not configured yet. Two possibilities are
provided: create the system storage on an empty storage device (USB
flash drive, SD card, an already existing HDD partition), or
partition an empty HDD into system storage and user data
partitions. Usage instructions:
- The system lists all found empty 1GB+ storages.
- Select the desired storage.
- If the selected storage's capacity is less than 100GB, the
entire storage is initialized as the system storage.
- Otherwise, if the selected storage is 100GB+ storage device, it
is partitioned into two partitions, the first partition is
initialized as the system storage, and the second partition is
kept unformatted (to format it, select it in the file browser
and press ENTER).
- "Deinitialize System Storage": allows to deinitialize the system
storage if it is already configured.
- "Clear System Storage": deletes all data stored on the system
storage. This, in particular, includes Blu-ray cache, main screen
shortcuts, content of Internet Radio and IPTV folders.
- "Clear Blu-ray Cache": clears Blu-ray cache (also known as "Blu-ray
local storage").
* Added support for "Flash Memory Storage" - an area of main flash
memory that can be used to store data instead of System Storage in some
cases.
- Flash Memory Storage currently can be used to store the following
data:
- Data cache for dune_folder.txt applications utilizing
"icon_archive" function (graphics packages downloaded from
Internet).
- Data cache for KartinaTV application (graphics and some other
information downloaded from Internet).
- For all other kinds of data that can be stored in System Storage,
Flash Memory Storage can not be used, and System Storage is still
required. This includes, in particular: Blu-ray cache, main screen
shortcuts, content of Internet Radio and IPTV folders.
- In future, it is planned to allow to use Flash Memory Storage for more
player functions.
- The purpose of Flash Memory Storage is that it makes it easy to use
the corresponding player functions for the users not having System
Storage attached. When System Storage is available, Flash Memory
Storare is not used (System Storage is used instead).
- Flash Memory Storage availability and capacity depends on a particular
Dune model.
- Dune HD Max, Dune HD Duo: Flash Memory Storage is always available
and its capacity is ~100MB (due to total 256MB of main flash memory
in these models).
- Dune HD Base 3.0, Dune BD Prime 3.0, Dune HD Smart D1/H1/B1: Flash
Memory Storage can be enabled/disabled (disabled by default) and
its capacity is ~16MB. Enabling Flash Memory Storage is performed
automatically when it is needed for the first time, or can be
performed manually via Setup. When Flash Memory Storage is enabled,
some optional firmware components (asian fonts) are removed from
the flash memory. When firmware is reinstalled/updated, Flash
Memory Storage becomes disabled again and these optional firmware
components are restored automatically (until Flash Memory Storage
is required again by some application). If these optional firmware
components are required, Flash Memory Storage can not be used
(System Storage should be used instead).
- Dune HD Lite 53D: Flash Memory Storage is always available and its
capacity is ~16MB.
- Setup section "Miscellaneous / System Storage" allows to see the
current status of Flash Memory Storage and provides the following
functions:
- "Enable Flash Memory Storage": allows to enable Flash Memory
Storage (only for Dune models where Flash Memory Storage option,
other Dune models have Flash Memory Storage always enabled).
- "Clear Flash Memory Storage": deletes all data from Flash Memory
Storage.
* Improved "Reset Settings" function.
- The confirmation dialog includes the information that player reboot
will be performed.
- Added clearing of all user-related data stored by the player in System
Storage (including main screen shortcuts and cached icon archive
data). NOTE: the content of Internet Radio and IPTV folders is not
cleared automatically (since these folders may contain files important
for the user); if needed, these folders can be cleared manually.
- Added clearing of all data in Flash Memory Storage.
* Integrated "KartinaTV" Internet TV service.
- More information: http://dune-hd.com/support/kartina_tv
* Integrated "IVI.ru" Internet Video service.
- More information: http://dune-hd.com/support/ivi_ru
* Various other improvements.
- The function of quick video mode choosing now provides feedback using
the LED on the front panel of the player:
- When the function is activated: the LED blinks once.
- When the user cancels the function: the LED blinks once.
- When a new video mode is chosen: the LED blinks 2 times.
- When the user confirms the new video mode: the LED blinks 3 times.
- Some interface languages added/updated.
- Some other improvements/fixes.
* Includes also all changes from 101201_1626.
請手上有 Dune HD Max的會員按這篇 最新韌體 下載囉
更新方式為:
關機 > 韌體放入拇指碟 > 開機 > USB隨身硬盤 > 選擇韌體 便會自動更新到完成
注意過程中不要拔斷電源與拔掉USB! 這樣更新會失敗!!!
請有Max的大家趕快試試唷!!!
這篇順序有點顛倒, 本篇下面是110127版的前一版, 101201的修正!
110127修正項已包含101201, 請直接用樓上54更新110127!!
所以下面修正作參考用!!!
Version "101201_1626"
Download: N/A (has not been released for this player model, the listed changes are included into next firmware versions)
Changes since 100916_2027_beta:
* Various playback improvements.
- Improved support for PGS subtitles during file playback.
- Improved support for playback of very high bitrate MPEG TS/PS files
and streams in specific cases.
- Improved support for recording of audio-only TS streams (implemented
more precise start of the recording).
- Improved support for playback of audio-only TS files (added duration
detection and current playback position indication).
- Improved playback of Internet Radio streams.
- Improved playback of MP3 audio files via UPnP.
- Improved compatibility with some Internet Video services accessible
via UPnP servers such as PlayOn Digital Media Server.
- Bugfix: stopping MKV playback with enabled subtitles could lead to a
crash in some cases.
- Bugfix: specific files could not be played smoothly from network in
some cases (the problem introduced in the firmware version
100630_2131_beta).
- Bugfix: switching between DVD chapters could cause audio problems (in
bitstream mode) (the problem introduced in firmware version
100916_2027_beta, because of a new Sigma SDK).
- Bugfix: bitstream audio output did not work correctly on some Blu-ray
discs in some cases (especially when 12-bit HDMI colorspace was used)
(the problem introduced in firmware version 100916_2027_beta, because
of a new Sigma SDK).
- Bugfix: some user actions during playback of certain Blu-ray BD-J
discs/images could cause green screen (the problem introduced in
firmware version 100916_2027_beta, because of a new Sigma SDK).
* Added support to play background music during photo viewing.
- Instruction: just launch a playlist consisting of both photos and
audio files, e.g.:
- Press PLAY on a folder containing photos and audio files.
- Put .M3U playlist file with links (paths) to audio files into the
folder with photos, press PLAY on this folder.
- Press SELECT to manually mark photos / audio files (or folders with
photos / audio files), and press PLAY. (Note: marking files works
only within single parent folder.)
- The following RC buttons are available for controlling background
audio playback in photo viewer:
- MUTE, V+/V-: mute and volume control.
- PAUSE/PLAY: pause/resume audio.
- NEXT/PREV: go to next/previous audio file.
- REW/FWD: the same as NEXT/PREV.
- NOTE: To navigate and pause/resume the photo slide show itself,
LEFT/RIGHT/ENTER RC buttons can be used.
- Notes:
- Limitations: WMAPro audio file format is not supported for this
feature; all other audio file formats should work (including MP3,
FLAC, OGG, APE, WAV, WMA, etc).
- All audio files are played sequentially (in the original order) in a
loop.
- Audio files using the same or compatible audio codec are played in
gapless mode.
* Other photo viewer improvements.
- ENTER RC button in photo viewer allows to pause/resume the slide show
(and LEFT/RIGHT, as before, allow to go to next/previous photo).
- Bugfix: specific huge panorama photos were handled wrongly in photo
viewer.
- Bugfix: photo viewer could crash in specific rare cases.
* Added support to play music w/o using TV, using the front panel display.
- The name of the currently selected item of the file browser (e.g.
file/folder) is shown on the display.
- When playback of a file/audiotrack starts, its title is shown on the
display for a few seconds.
- The currently selected playlist item (when playlist browser is
activated by pressing POP UP MENU RC button during playback) is shown
on the display.
- Long names/titles are scrolled through the display.
- The new features can be disabled via settings in "Setup /
Miscellaneous / Built-in Display".
* Added support for ALAC (Apple Lossless) audio files.
* Added support for WavPack lossless audio files.
* Added 24/50 and 24/60 autoframerate modes.
* Added "dynamic range control" support.
- Added "Setup / Audio / Dynamic Range Control" setting, with possible
values "Off", "Medium", "High", "Auto". Allows to specify the desired
DRC behavior for audio tracks supporting DRC.
* Volume control improvements.
- New graphical volume indicator during file and DVD playback, with a
special warning (red color) about possible overload (volume level more
than 0dB).
* Zoom improvements.
- Added a new zoom preset for file playback: "full fill screen" --
similar to "fill screen" but with filling the entire screen both
vertically and horizontally.
- Bugfix: remembering zoom settings could work wrongly in some cases.
* Blu-ray INFO OSD improvements.
- Added showing of the total playback time in INFO OSD during Blu-ray
playback.
- Added showing the information about secondary video and secondary
audio tracks in INFO OSD during Blu-ray playback; some other related
changes/improvements.
* Improved handling of RC buttons during playback.
- CLEAR RC button allows to restore the default vertical position of
subtitles in subtitles setup mode.
- PLAY RC button is not used anymore for starting/stopping recordings;
only REC RC button should be used for this.
* Improved handling of RC buttons in file browser.
- PREV and NEXT RC buttons are handled as P+/P- in file browser (allow
to switch to next/previous page in large directory listings) (the
feature requested by some users of universal remotes).
- Added a possibility to quickly toggle interface language: AUDIO RC
button on the main screen shows a dialog for choosing the language.
* Improved handling of front panel buttons in file browser.
- PREV and NEXT front panel buttons now allow to navigate both when icon
view is used (handled as LEFT and RIGHT, with ability to go from one
row to another) and when list view is used (handled as UP and DOWN).
* Added support for Hebrew (Right-to-Left) filenames.
* Added clock on front panel display in standby.
- Clock is shown automatically when time is synchronized (i.e. time
synchronization option is enabled and Internet connection is working,
or a time server in the local network is used); when time is not
synchronized, clock is not shown.
- NOTE: Time synchronization is automatically enabled after upgrade to
this firmware version. If not needed/desired, it can be disabled via
"Setup / Miscellaneous / Time synchronization".
- Clock is shown in "software standby" mode only.
- Clock showing can be disabled via "Setup / Miscellaneous / Built-in
Display / Show time on display".
* Added new UI customization possibilities (for "dune_folder.txt"
applications).
- Added dune_folder.txt feature: possibility to specify the default
sorting settings for the folder. Syntax:
- sort_field = name|size|atime|mtime|unsorted
- sort_dir = asc|desc
- Added dune_folder.txt feature: paths in the definition of virtual
items can be relative paths.
- Image/icon files can now have also special extensions .djpg, .dbmp,
.dpng (helpful e.g. to allow Movie Collections PC applications to
prevent indexing of the files by OS for better performance).
* Various DVB-T improvements.
- Included a newer improved version of DVB-T drivers, which improve
DVB-T reception quality and fix some problems.
- Improved support for national characters in DVB-T channel names.
- Added a possibility to use DVB-T w/o system storage (support for nice
channel icons is disabled in this case).
- Added a possibility to specify the location (country and city) when
scanning for the channels (speeds up the scanning process and also may
improve the results of the scanning). The location can also be
specified in Setup / Applications / DVB-T.
- Added showing of progress information during scanning and a
possibility to stop the scan process.
- Added a possibility to launch the scan also from the settings page
(Setup / Applications / DVB-T).
* Torrent client improvements.
- Maximum number of torrent client peers is set to 50 by default (to
prevent problems taking place in some cases, as reported by some
users).
- More correct reporting of errors by torrent client in some cases.
- Bugfix: torrent client did not support working with partition-less
storage devices.
* Network setup improvements.
- Added a new network configuration mode: "Auto (DHCP), manual DNS",
allowing to use DHCP for automatic configuration of basic network
settings, but specify DNS settings manually (as needed for some
Internet providers).
- Improved indication when the player is waiting for IP address.
* WiFi setup improvements.
- Added an ability to choose WiFi network from the list.
- Setup / Network / (WiFi) Settings -> Scan for networks...
- Added autodetection of the best possible WiFi security method when
choosing WiFi network from the list.
- WiFi password is shown as normal text to make it easier to
enter/validate it.
* Added PPPoE support.
- Added PPPoE network connection kind (i.e.: Dune connected via Ethernet
cable directly to an Internet provider which uses PPPoE connection,
with login/password-based authorization).
* Added SMB server settings (Setup / Applications / SMB Server).
- Server name.
- Workgroup name.
- Server description.
- Ability to disable SMB server.
* Time zone setup improvements.
- Time zone configuration (Setup / General / Time zone) is made more
convenient: for each listed time zone, the current time taking place
according to this time zone is shown.
* Added built-in "Reset Settings" function.
- No more need to use a DSF file for this.
- Usage: "Setup / General / Reset Settings".
- Resets all player settings to default values and also clears all other
user-related data stored by the player in main flash memory (such as:
file/DVD bookmarks, configuration of network folders, etc).
- Also clears Blu-ray cache (also known as Blu-ray local storage) in
System Storage (when System Storage is attached).
* Various other improvements.
- Changed indication of "AC3" and "EAC3" audio tracks to "Dolby Digital"
and "Dolby Digital Plus" (as required by Dolby).
- Bugfix: pressing POP UP MENU on main screen shortcuts pointing to a
non-accessible network resource could cause a lockup for several
minutes.
- Other minor fixes.
* Includes also changes from 100828_0034_update1 ("Auto" fan mode).
可以接上網路直接用內建的工具去更新嗎???
請手上有 Dune HD Max的會員按這篇 最新韌體 下載囉
更新方式為:
關機 > 韌體放入拇指碟 > 開機 > USB隨身硬盤 > 選擇韌體 便會自動更新到完成
注意過程中不要拔斷電源與拔掉USB! 這樣更新會失敗!!!
請有Max的大 ...
neuHD 發表於 2011-2-1 14:41 http://www.hd.club.tw/images/common/back.gif
42# joe0926168968
如果要用bt, 電源鍵不用關囉...因為standby與運作中耗電差不多!!!樓下len1978說的一樣, 中文說明書也有提到!!
如果關掉了, 請把種子砍掉重練!! ...
neuHD 發表於 2011-2-1 10:26 http://www.hd.club.tw/images/common/back.gif
那再請教neuHD大，如果沒有下載完想要先關機，應該要怎樣才算是正確關掉BT下載呢?
是先把BT斷線再進行關機動作嗎?
PS:再補充一下~~~~似乎不用砍掉重練....放久一點之後...她們又開始動作了!!
本文章最後由 Apothem 於 2011-2-1 16:42 編輯
熱騰騰 Dune HD Max 新版的韌體發佈囉!
先貼原廠原文的修正!!
Dune HD Max
--------------------------------------------------------------------------------
Version "110127_2105_beta" (BETA version, not w ...
neuHD 發表於 2011-2-1 14:37 http://www.hd.club.tw/images/common/back.gif
一堆玩家苦等 "第四區固件" 的更新, 結果只得到一句 "工程師返鄉過年" 的回應!X(
想不到主攻海外市場的 Dune 竟會趕在農曆過年前推出更新,看來轉換跑道是正確的決定!
Dune Firmware Zone的韌體, 之前雖然一直停留在100916, 可是還是不斷有測試版約1-2個月就一個版本..
在這次110127之前的測試版是110114, 那時就有消息說約1月底會release新韌體..
看來Dune在韌體開發的時程控管, 還蠻好的喔~
34# jacky_3977
遙控器 mode + 1, 2, 3, 4 可快速設定內建的解析度, 您可先嘗試變換設定是否改善!
neuHD 發表於 2011-2-1 00:29 http://www.hd.club.tw/images/common/back.gif
解決了,
感謝