ISO 轉 BD-RE DL (50G->50G) 超過容量, 怎辦
AnyDVD 6630 轉成的 ISO可用 PowerDVD 播放
但用 ImgBurn 2510 燒錄至 SONY BD-RE DL (50G) 出現
Image Size 24,111,104 Sectors(47,092 MB)
Disc Size 23,652,352 Sectors(46,196 MB)
Would you like to continue anywhy?
試過 continue, 結果是 Fail,
改用 CLoneDVD2 也是容量不足的訊息.
請問單兵如何處置? 可能 BD-RE DL 容量較小, 試試 BD-R DL 看看.
之前單層 的有過這樣.
[ 本帖最後由 cdfire 於 2010-3-29 17:04 編輯 ] 正在試這個解法,
把ImgBurn請出來，在Tools→Settings...→Write中，將Prefer Format Without Spare Areas勾選後再重新做Full Erase，這個功能可以將Spare Areas拿來做儲存空間
http://www.hd.club.tw/thread-17970-1-1.html 請問測試結果OK嗎 結果失敗,截圖於下
[ 本帖最後由 srv 於 2010-3-30 06:25 編輯 ] BD-RE 資訊於下
PIONEER BD-RW BDR-205 1.03 (SATA)
Current Profile: BD-RE
Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: Yes
Sessions: 1
Sectors: 23,652,352
Size: 48,440,016,896 bytes
Time: 5256:06:52 (MM:SS:FF)
Supported Write Speeds: 2x
TOC Information:
Session 1... (LBA: 0)
-> Track 01(Mode 1, LBA: 0 - 23652351)
-> LeadOut(LBA: 23652352)
BD Disc Information (L0):
Disc ID: MEI-T01-01
Disc Type: BD-RE
Disc Size: 120mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
Last User Data PSN for Disc: 0
First PAA of Data Zone: 131,072
Last PAA of Data Zone: 1,658,494
BD Disc Information (L1):
Disc ID: MEI-T01-01
Disc Type: BD-RE
Disc Size: 120mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
Last User Data PSN for Disc: 0
First PAA of Data Zone: 2,535,808
Last PAA of Data Zone: 4,063,230
Format Capacities:
DT: 0x02 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x00 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x30 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x30 - NB: 23259136 (0x0162E800) - TDP: 36864
FT: 0x30 - NB: 24307712 (0x0172E800) - TDP: 4096
FT: 0x31 - NB: 24438784 (0x0174E800) - TDP: 2048
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 23652351 (0x0168E7FF)
-> RS: 8,990 KB/s (2x) - WS: 8,990 KB/s (2x) 我想我可能弄錯了,
ImgBurn 應該預設用的是完整模式
我卻取消了它.
測試結果再回報上來. 來... 先做一下功課喔..!
Blu-ray Disc 的基本概念 (By 土匪)
BD的容量到底有多大？ (By 土匪)
您應該也是衝這波 Pioneer 特價才踏入 BD 燒錄的領域吧...
實做之前還是先搞懂一些該具備的知識比較好喔...
Panasonic 從 PD -> DVD-RAM -> BD-RE 一路走下來, 最後總算是在 SONY 的協助之下打下 光碟儲存媒體 的江山.
如果您有興趣, 可以研究一下 PD 以及 DVD-RAM 的部份吧.
[ 本帖最後由 KOBSS 於 2010-3-30 09:33 編輯 ] > 這波 Pioneer 特價才踏入 BD 燒錄的領域.
被發現了.... 哈哈.謝謝您的建議.
網路上看到這篇, 應該算是解答了.
做完之後, 還要退片再重讀一次.
Once you have the media, you want to do a low-level format. To do this, run ImgBurn, and open up
Tools > Settings > Write. Check the box next to "Prefer Format Without Spare Areas." This sets
ImgBurn to format without a SSA if possible. Then do a full erase. (It calls it a full erase, but
it's actually sending the FORMAT UNIT command to the drive.) After you do this, eject and re-insert
the disc so that Vista recognizes the extra space.
= ImgBurn Disc Info (factory formatted) =
Preferred Format Capacity:
Sectors: 2,236,704
Size: 4,580,769,792 bytes
Time: 497:04:54 (MM:SS:FF)
Maximum Format Capacity:
Sectors: 2,295,072
Size: 4,700,307,456 bytes
Time: 510:02:72 (MM:SS:FF)
[ 本帖最後由 srv 於 2010-3-30 12:52 編輯 ] 測試成功了!! 總結一下
拿到新的 BD-RE 要記得先拿 ImgBurn 低階格式化一下才能使用到最大的容量.
ImgBurn 預設就是 Perfer Format without Spare Areas, 所以直接 Erase Full 即可 .
完成後記得退片, 再重新讀取即可.
[ 本帖最後由 srv 於 2010-3-31 12:39 編輯 ] PIONEER BD-RW BDR-205 1.03 (SATA)
Current Profile: BD-RE
Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: Yes
Sessions: 1
Sectors: 24,438,784
Size: 50,050,629,632 bytes
Time: 5430:52:34 (MM:SS:FF)
Supported Write Speeds: 2x
TOC Information:
Session 1... (LBA: 0)
-> Track 01(Mode 1, LBA: 0 - 24438783)
-> LeadOut(LBA: 24438784)
BD Disc Information (L0):
Disc ID: MEI-T01-01
Disc Type: BD-RE
Disc Size: 120mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
Last User Data PSN for Disc: 0
First PAA of Data Zone: 131,072
Last PAA of Data Zone: 1,658,494
BD Disc Information (L1):
Disc ID: MEI-T01-01
Disc Type: BD-RE
Disc Size: 120mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
Last User Data PSN for Disc: 0
First PAA of Data Zone: 2,535,808
Last PAA of Data Zone: 4,063,230
Format Capacities:
DT: 0x02 - NB: 24438784 (0x0174E800) - TDP: 0
FT: 0x00 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x30 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x30 - NB: 23259136 (0x0162E800) - TDP: 36864
FT: 0x30 - NB: 24307712 (0x0172E800) - TDP: 4096
FT: 0x31 - NB: 24438784 (0x0174E800) - TDP: 2048
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 24438783 (0x0174E7FF)
-> RS: 8,990 KB/s (2x) - WS: 8,990 KB/s (2x) 原帖由 srv 於 2010-3-31 05:33 發表 http://www.hd.club.tw/images/common/back.gif
測試成功了!! 總結一下
拿到新的 BD-RE 要記得先拿 ImgBurn 低階格式化一下才能使用到最大的容量.
ImgBurn 預設就是 Perfer Format without Spare Areas, 所以直接 Erase Full 即可 .
完成後記得退片, 再重新讀取即 ...
BD-RE在第一次燒錄的時候都會要求你Format.......
頁:
[1]