反正步驟已經記住,或是看前面的面板來操作也是OK....
1.3..52版感覺好像有穩一些,原本用1.3.48看赤壁會當機,而且切換到
24P的時候螢幕也正常了
不過次世代音效還是有點問題. 原帖由 jyc3 於 2008-10-4 16:28 發表 http://www.hd.club.tw/images/common/back.gif
我每次灌新軟體,HDMI都會失效,要重新設定.懶得接S端子或是其他,
反正步驟已經記住,或是看前面的面板來操作也是OK....
1.3..52版感覺好像有穩一些,原本用1.3.48看赤壁會當機,而且切換到
24P的時候螢幕也正常了
不過 ...
我用1.3.52不能播放DTS HDMA
還是用會1.3.28 廠商說~
一次來100台!
有好價錢~
有網兄要衝的嗎? TViX Update 1.3.55: Early Beta treat 2...
As with the previous release, this is a test version. test and report
concerning the changes applied and general operations that can be
considered major bugs introduced with this release. All else will be
ignored by us anyway (for those that keep repeating the same things
we already know is not yet fixed or not included...
Changes from 1.3.52.
-Low bitrates mp3 files are supported.
All low bitrates mp3 files, of which sampling frequency is less than 32kHz, get up sampled to 44.1kHz
- Fixed a bug of occasional no sound with DTS-HD MA and Dolby Digital Plus
- Fixed a bug of incorrect sound on MPEG audio in AVI and MKV through HDMI
- Fixed occasional high audio pitch problem..
- Fixed audio does not sound through HDMI when playing DVD or
changing audio tracks of DVD.?
- Fixed occasional no audio when the unit is freshly booted.
- Fixed a problem of no MKV embedded subtitle in some cases.
- It supports Chinese station names for DTV
Downbload: http://demod.dvico.com/PreRelease/tvix_M-6x00_1.3.55_aa.zip 原帖由 chhanthony 於 2008-10-13 22:16 發表 http://www.hd.club.tw/images/common/back.gif
TViX Update 1.3.55: Early Beta treat 2...
As with the previous release, this is a test version. test and report
concerning the changes applied and general operations that can be
considered major bu ...
感謝分享～鼓掌= 鼓掌=
又有新韌體.回家趕快來試試
看有沒有更讚！！拜託@ 拜託@ 原帖由 kh2209 於 2008-10-9 21:03 發表 http://www.hd.club.tw/images/common/back.gif
廠商說~
一次來100台!
有好價錢~
有網兄要衝的嗎?
哈,那好價格是多少呢?
話說回來,一次100台,要達到這目標大不易吧!@$$@ 原帖由 Abby 於 2008-10-14 11:25 發表 http://www.hd.club.tw/images/common/back.gif
哈,那好價格是多少呢?
話說回來,一次100台,要達到這目標大不易吧!@$$@
沒那個肚子～
我不敢吃那個瀉藥～
從開賣到現在～
都還沒一半咧！
哈哈～
Tvix M6500A firmware 1.3.59
TViX Update 1.3.59: Early Beta treat 3 (Link posted)As with the previous release, this is a test version. Test and report
concerning the changes applied and general operations that can be
considered major bugs introduced with this release. All else will be
ignored by us anyway (for those that keep repeating the same things
we already know is not yet fixed or not included)...
Changes from 1.3.55
Added new options of no outline for the subtitle font to improve the showing speed.
Now, audio and subtitle will be selected on the popup.
Fixed a bug that subtitle is not shown when subtitle font size is too large.
Fixed a bug that Audio track selection does not work with mpeg/ts file types.
Fixed Dolby Digital + detection problem
Fixed DTV SPDIF audio output problem when the audio codec is MPEG
Knwon issues,
M4A files are not played correctly.
PCM track on DVD may not output through HDMI with some display.
*** If you play files with HD audio tracks like Dolby TrueHD, ,
Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass
through on the setup even though you don’t have a receiver that supports
decoding of these formats. Otherwise, you will hear strange noise with
some repetitive popping noise. Currently, we don’t support core
decoding, if you don’t have a HD audio decoder receiver, you need to
select other then these HD audio tracks audio track for now.
http://demod.dvico.com/PreRelease/tvix_M-6x00_1.3.59_asdf.zip 又有新韌體了, 昨天總算在Onkyo SR-606上看到TrueHD and MultiChannel了, 用的是之前的1.3.52版. 原來以前都是自己的設定錯誤@吐舌@
TrueHD 可以放的手上有的是"Elton.60-Live.at.Madison.Square.Garden.2007", "Batman.Begins"..."Transformers.Blu-ray.REMUX.H264.1080P.TrueHD.DD51.SILUHD"則放不出來......找時間試試新F/W可不可以
yrjou 感謝分享！！鼓掌= 鼓掌=
Tvix M6500A firmware 1.3.59
新版的韌體多增加了一個功能.就是音軌的選擇
變成會跳出一個POPUP的視窗讓你方便挑選音軌
不用像以前一定要用Audio鍵一直按一直按.
這個新的設計.個人覺得蠻不錯的鼓掌= 鼓掌=
另外字幕的選擇好像也是類似.再試試看吧！ 之前放不出來的TrueHD 音源....
"Transformers.Blu-ray.REMUX.H264.1080P.TrueHD.DD51.SILUHD" & "chp@CHD_IronMan.Blu-Ray-H264-Remux.1080p.DTS5.1.TrueHD5.1"
經過TsRemux轉成M2TS format 之後, 現在已可正常輸出TrueHD給Onkto 606解碼. (用的是1.3.59 F/W)
之前有問題朋友, 可以試著用TsRemux 再處理過...
但有些ts file, 反而TsRemux 抓出來是有問題的...如....Batman,
yrjou 1.3.59 是有改善, DTS-HD 可pass through 到我的 Denon 3808 點燈 w/o any problem
但是 TrueHD 還是 show (0ch),Tvico 再加點油吧 請問old兄,
在firmware 59 版下, 多種language 字幕 srt 檔, 要改成甚麼檔名extension,
6500a 的 subtitle menu 才選的到阿? 以前firmware版本都可依續切換的阿?
Thanks
原帖由 old235 於 2008-11-2 07:05 發表 http://www.hd.club.tw/images/common/back.gif
感謝分享！！鼓掌= 鼓掌=
Tvix M6500A firmware 1.3.59
新版的韌體多增加了一個功能.就是音軌的選擇
變成會跳出一個POPUP的視窗讓你方便挑選音軌
不用像以前一定要用Audio鍵一直按一直按.
這個新的設計.個人覺得蠻不錯 ... 請問yrjou兄,
您是用甚麼方式用TsMuxer過水的阿?, 我找到 I am legend 來試, 改成mt2s 更糟
連原來可選到的 TrueHD sound track, 都選不到了
原帖由 yrjou 於 2008-11-5 11:22 發表 http://www.hd.club.tw/images/common/back.gif
之前放不出來的TrueHD 音源....
"Transformers.Blu-ray.REMUX.H264.1080P.TrueHD.DD51.SILUHD" & "chp@CHD_IronMan.Blu-Ray-H264-Remux.1080p.DTS5.1.TrueHD5.1"
經過TsRemux轉成M2TS format 之後, 現在已可正常 ... 原帖由 joewang2003 於 2008-11-7 10:51 發表 http://www.hd.club.tw/images/common/back.gif
請問old兄,
在firmware 59 版下, 多種language 字幕 srt 檔, 要改成甚麼檔名extension,
6500a 的 subtitle menu 才選的到阿? 以前firmware版本都可依續切換的阿?
Thanks
...
字幕檔.srt跟之前一樣.不需更動
字幕的選擇跟音軌的選擇一樣
變成會跳出一個POPUP的視窗讓你方便挑選語言
不像以前只能用subtitle鍵一直按一直按.
試試看吧！:-h :-h
回復 #426 joewang2003 的帖子
我用的是TsRemux V0.0.21.2重新轉成M2TS.
但不是每一片都可以, 我手上剛好沒有I am legend 這片,
沒辦法試, sorry....
yrjou I thought it's TsMuxer, so I will try again by using TsRemuxer
thanks yrjou and old 請教各大大，在firmware 59 版下，按下"function"鍵，選第一行第三個icon，所有icon變成大圖示，但不能變回列表，(理應再按多一次同樣選項就能)，請問怎樣可回覆原來的列表模式，試過於menu進行"回覆出廠預設值"亦不能改回，請問大家有這經驗嗎？ 趁著假日, 把手上的Spiderman 3 原版BD拿來轉成M2TS....喂給M6500吃....嗯...正常
F/W 59目前算是比較滿意的, 轉出來的SpiderMan 3 TrueHD可以正常輸出在我的Onkyo 606上.
有空再多試轉一些出來看看....
yrjou 請教old,
這樣的 srt file naming 對嗎? F/W 59 下, 按 subtitle key 跳出的字幕選項為 none.
Thank you in advanced....
原帖由 old235 於 2008-11-8 19:58 發表 http://www.hd.club.tw/images/common/back.gif
字幕檔.srt跟之前一樣.不需更動
字幕的選擇跟音軌的選擇一樣
變成會跳出一個POPUP的視窗讓你方便挑選語言
不像以前只能用subtitle鍵一直按一直按.
試試看吧！:-h :-h...