電腦畫面輸出

bitubo_arai · 發表於 2008-7-22 15:30:32

馬上註冊，結交更多好友，享用更多功能，讓你輕鬆玩轉社區。

您需要登錄才可以下載或查看，沒有賬號？註冊

x

電腦顯示卡9600GSO~DVI轉HDMA
電視 TOSHIBA 42吋電漿 DVI轉HDMI

畫面是有了~但是會切邊<四邊都切一點左右>
畫質比S端子還好

請問如何解決?

調整解析度也沒辦法

milanese · 發表於 2008-7-25 14:06:52

http://tech.163.com/07/0724/11/3K5N4LJJ000926PT_2.html

供您參考看看

只是有點好奇,若電視本身沒有HDMI

為何不用DVI 連接就好?

多二個轉接頭,問題可能也會多些!

kkcci88888 · 發表於 2008-7-25 14:16:56

Yup, I got the same situation with you as my 42' Plamsa built-in plug is the DVI so my computer using the DVI cable direct connect to it and so far so good.

BTW, there is slight improvement over HDMI vs DVI and I think the current output on a DVI Plamsa can only output to 1024x768 max which I said will not have too much different.