請問韌體更新一半斷電會怎樣?

dokken · 發表於 2007-11-30 00:09:32

馬上註冊，結交更多好友，享用更多功能，讓你輕鬆玩轉社區。

您需要登錄才可以下載或查看，沒有賬號？註冊

x

請問韌體更新一半斷電會怎樣?

死機嗎?

這時候就必須送原廠囉

plutot · 發表於 2007-11-30 00:33:41

請問你說的韌體是bios還是什麼?是電腦的還是音響的主機?麻煩你說清楚一點

old235 · 發表於 2007-11-30 13:53:36

如果是M-4100SH的話.也有一個韌體更新失敗的回復方式啊！
原廠網站就有說明Safe Mode Firmware Upgrade
http://www.tvix.co.kr/eng/faq/FA ... ATID=5&SCATID=8

If the power runs out or is shut down by accident, you will have to restart the Safe Mode Upgrade.

Pls refer to the following Instructions:

1. First connect the TViX to your PC
2. Create a 'tvixfw' folder to the first partition of the TViX hard disk.
3. Copy the most recent firmware file to the tvixfw folder after extract the firmware.
4. Disconnect the TVIX from your PC using Safe Remove feature of WIndows.
5. While pressing the SETUP button (shown in the image below), turn 'ON' the power of the TVIX.
6. The copied firmware will be displayed on the VFD screen as 'HDD1/FW 1:01:00"
7. If you press the OK button on the remote control or the TVIX, it will start the firmware upgrade.
8. The PRE message and numbers will be displayed when erasing the previous firmware.
9. When upgrading, the VFD, UPG and numbers will be displayed.
10. When the upgrading process is finished the TViX will reboot automatically and the initial screen will be displayed on the TV.

* If the firmware cannot be upgraded with the Safe Mode, it means that either the loader is damaged or the hard disk cannot read the firmware. In such cases, please consult with the technical support team.