TviX 6500A Official DviCo Firmware 1.3.137 (Regular)(16.6.2009)

chhanthony

from MPC Club

http://www.mpcclub.com/modules.p ... ewtopic&t=21970

Official DviCo Discussion: Firmware 1.3.137 (Regular)
DOWNLOAD
http://demod.dvico.com/PreRelease/tvix_M-6x00_1.3.137.zip

Changes from 1.3.129
1. Fixed NTP server option is disabled when IP is get properly
through DHCP server.
2. Now TV connection type is set to HDMI even if the EDID is not get
from HDMI.
3. Imporved Enhanced AC3 stream on recorded streams through a tuner.
4. Network stream performance is optimized.
5. For DTV, fixed the recorded file name is not correctly set for
the som Czech stations.

Known issues and limitations for Video related
- Some TP/TS information may not correct.
- When HD Audio pass-through is on, S/PDIF does not output.
- When HD Audio pass-through is off with HD audio stream, the
playback is not smooth.
¡Û When DTS audio setting is digital, HDMI audio is ON and HD
audio pass-through is set to ON, then audio is not heard on the SPDIF
output.
¡Û For the same setting, if HDMI audio is set to OFF, then it
sounds through the SPDIF output.
- Some TP/TS files may cause the system rebooting.
- Some WMV may not play correctly.
- The digital output for AAC/WMA is disabled.
- Does not support PCM audio track on MP4 now.
- TVIX may not get IP from DHCP server after change between DTV and
Player modes and this can be solved by retrying DHCP on the setup.

Known issues for Audio and pictures playing
- For MP3 files with low sampling frequency, the TVIX might crash
while playing or trick play like FF or RW.
- M4A files are not supported now and AAC may not play correctly.

Known issues for PVR
- After channel changed, you may not here audio in short time. . To
work around it, you can press DTV key or Audio key on the remote.

Known issues for general issues
- If you play files without refreshing the file list after delete
files through FTP or SAMBA server, the system will reboot.

*** If you play files with HD audio tracks like Dolby TrueHD, ,
Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass
through on the setup even though you don¡¯t have a receiver that supports
decoding of these formats. Otherwise, you will hear strange noise with
some repetitive popping noise. Currently, we don¡¯t support core
decoding, if you don¡¯t have a HD audio decoder receiver, you need to
select other then these HD audio tracks audio track for now.

joewang2003

please note that this so-called "regular" release doesn't support UJ. Hence, I will stay with 1.3.132 UJ release at this point.

old235

此版本未支援藍光選單
也不知道到底修正了什麼東東!!
真是敬謝不敏啊!