ISO 轉 BD-RE DL (50G->50G) 超過容量, 怎辦

srv · 發表於 2010-3-28 11:30:06

馬上註冊，結交更多好友，享用更多功能，讓你輕鬆玩轉社區。

您需要登錄才可以下載或查看，沒有賬號？註冊

x

AnyDVD 6630 轉成的 ISO
可用 PowerDVD 播放
但用 ImgBurn 2510 燒錄至 SONY BD-RE DL (50G) 出現

Image Size 24,111,104 Sectors(47,092 MB)
Disc Size 23,652,352 Sectors(46,196 MB)
Would you like to continue anywhy?

試過 continue, 結果是 Fail,
改用 CLoneDVD2 也是容量不足的訊息.

請問單兵如何處置?

cdfire · 發表於 2010-3-29 16:59:32

可能 BD-RE DL 容量較小, 試試 BD-R DL 看看.
之前單層的有過這樣.

[ 本帖最後由 cdfire 於 2010-3-29 17:04 編輯 ]

srv · 發表於 2010-3-30 02:34:14

正在試這個解法,
把ImgBurn請出來，在Tools→Settings...→Write中，將Prefer Format Without Spare Areas勾選後再重新做Full Erase，這個功能可以將Spare Areas拿來做儲存空間

http://www.hd.club.tw/thread-17970-1-1.html

johnnyro · 發表於 2010-3-30 05:57:08

請問測試結果OK嗎

srv · 發表於 2010-3-30 06:23:20

結果失敗,截圖於下

[ 本帖最後由 srv 於 2010-3-30 06:25 編輯 ]

srv · 發表於 2010-3-30 06:40:47

BD-RE 資訊於下

PIONEER BD-RW BDR-205 1.03 (SATA)
Current Profile: BD-RE
Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: Yes
Sessions: 1
Sectors: 23,652,352
Size: 48,440,016,896 bytes
Time: 5256:06:52 (MM:SS:FF)
Supported Write Speeds: 2x
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 23652351)
-> LeadOut (LBA: 23652352)
BD Disc Information (L0):
Disc ID: MEI-T01-01
Disc Type: BD-RE
Disc Size: 120mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
Last User Data PSN for Disc: 0
First PAA of Data Zone: 131,072
Last PAA of Data Zone: 1,658,494
BD Disc Information (L1):
Disc ID: MEI-T01-01
Disc Type: BD-RE
Disc Size: 120mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
Last User Data PSN for Disc: 0
First PAA of Data Zone: 2,535,808
Last PAA of Data Zone: 4,063,230
Format Capacities:
DT: 0x02 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x00 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x30 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x30 - NB: 23259136 (0x0162E800) - TDP: 36864
FT: 0x30 - NB: 24307712 (0x0172E800) - TDP: 4096
FT: 0x31 - NB: 24438784 (0x0174E800) - TDP: 2048
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 23652351 (0x0168E7FF)
-> RS: 8,990 KB/s (2x) - WS: 8,990 KB/s (2x)

srv · 發表於 2010-3-30 08:17:12

我想我可能弄錯了,
ImgBurn 應該預設用的是完整模式
我卻取消了它.

測試結果再回報上來.

KOBSS · 發表於 2010-3-30 09:25:51

來... 先做一下功課喔..!

Blu-ray Disc 的基本概念 (By 土匪)
BD的容量到底有多大？ (By 土匪)

您應該也是衝這波 Pioneer 特價才踏入 BD 燒錄的領域吧...
實做之前還是先搞懂一些該具備的知識比較好喔...

Panasonic 從 PD -> DVD-RAM -> BD-RE 一路走下來, 最後總算是在 SONY 的協助之下打下光碟儲存媒體的江山.
如果您有興趣, 可以研究一下 PD 以及 DVD-RAM 的部份吧.

[ 本帖最後由 KOBSS 於 2010-3-30 09:33 編輯 ]

srv · 發表於 2010-3-30 12:50:40

> 這波 Pioneer 特價才踏入 BD 燒錄的領域.
被發現了.... 哈哈. 謝謝您的建議.
網路上看到這篇, 應該算是解答了.
做完之後, 還要退片再重讀一次.

Once you have the media, you want to do a low-level format. To do this, run ImgBurn, and open up
Tools > Settings > Write. Check the box next to "Prefer Format Without Spare Areas." This sets
ImgBurn to format without a SSA if possible. Then do a full erase. (It calls it a full erase, but
it's actually sending the FORMAT UNIT command to the drive.) After you do this, eject and re-insert
the disc so that Vista recognizes the extra space.

= ImgBurn Disc Info (factory formatted) =

Preferred Format Capacity:
Sectors: 2,236,704
Size: 4,580,769,792 bytes
Time: 497:04:54 (MM:SS:FF)

Maximum Format Capacity:
Sectors: 2,295,072
Size: 4,700,307,456 bytes
Time: 510:02:72 (MM:SS:FF)

[ 本帖最後由 srv 於 2010-3-30 12:52 編輯 ]

srv · 發表於 2010-3-31 05:33:08

測試成功了!! 總結一下
拿到新的 BD-RE 要記得先拿 ImgBurn 低階格式化一下才能使用到最大的容量.
ImgBurn 預設就是 Perfer Format without Spare Areas, 所以直接 Erase Full 即可 .
完成後記得退片, 再重新讀取即可.

[ 本帖最後由 srv 於 2010-3-31 12:39 編輯 ]

srv · 發表於 2010-3-31 06:07:00

PIONEER BD-RW BDR-205 1.03 (SATA)
Current Profile: BD-RE

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: Yes
Sessions: 1
Sectors: 24,438,784
Size: 50,050,629,632 bytes
Time: 5430:52:34 (MM:SS:FF)
Supported Write Speeds: 2x

TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 24438783)
-> LeadOut (LBA: 24438784)

BD Disc Information (L0):
Disc ID: MEI-T01-01
Disc Type: BD-RE
Disc Size: 120mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
Last User Data PSN for Disc: 0
First PAA of Data Zone: 131,072
Last PAA of Data Zone: 1,658,494

BD Disc Information (L1):
Disc ID: MEI-T01-01
Disc Type: BD-RE
Disc Size: 120mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
Last User Data PSN for Disc: 0
First PAA of Data Zone: 2,535,808
Last PAA of Data Zone: 4,063,230

Format Capacities:
DT: 0x02 - NB: 24438784 (0x0174E800) - TDP: 0
FT: 0x00 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x30 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x30 - NB: 23259136 (0x0162E800) - TDP: 36864
FT: 0x30 - NB: 24307712 (0x0172E800) - TDP: 4096
FT: 0x31 - NB: 24438784 (0x0174E800) - TDP: 2048

Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 24438783 (0x0174E7FF)
-> RS: 8,990 KB/s (2x) - WS: 8,990 KB/s (2x)

土匪 · 發表於 2010-3-31 08:51:32

原帖由 srv 於 2010-3-31 05:33 發表
測試成功了!! 總結一下
拿到新的 BD-RE 要記得先拿 ImgBurn 低階格式化一下才能使用到最大的容量.
ImgBurn 預設就是 Perfer Format without Spare Areas, 所以直接 Erase Full 即可 .
完成後記得退片, 再重新讀取即 ...

BD-RE在第一次燒錄的時候都會要求你Format.......