|
|
樓主 |
發表於 2011-12-4 16:18:07
|
顯示全部樓層
本文章最後由 ai_0301 於 2011-12-5 11:23 編輯
新版 I/F looks more friendly ! 貼圖更方便.
Foobar spectrum and MCACC measurement, two in one 
MCACC SPL setting
Option 1:If you have a capable Sub, then you should let it handle all the low frequencies. In this case, you need to set the speakers to SMALL and the Sub to YES.......... Also known as THX mode
Option 2:
If your speakers handle low frequencies quite well, then you can leave them all to LARGE. Now, if you want the Sub to output bass simultaneously with the other speakers as well, keep the Sub setting as PLUS. In this case, the crossover will decide which frequencies get additionally sent to the Sub to be output..................擁有高檔 5.1 ~ 9.1 喇叭業主的選項
Option 3:
If you don't want excess bass, and you want to use the Sub just for the LFE channel and for nothing else, keep speakers as LARGE and change the Sub to YES.............純兩聲道玩家, 不喜 SW 的選項
Option 4:
If your fronts are capable of handling full-range sound and your surrounds are not, then just keep the fronts to LARGE and change the surrounds and center to SMALL and keep the Sub as YES. In this case, the Sub will be sent the lower frequencies from the surround channels. Note that when you playback stereo sources, the Sub will be inactive, since the fronts are being sent the full-range sound......... 只有主聲道夠強, 其他普普 選此項
Option 5:
Similar to Option 4, but having the Sub as PLUS instead of YES. In this case, the Sub will be active and will be sent the lower frequencies from the front channels as well. So, the Sub will be active even for stereo sources ........ 2.1 聲道玩家選項
|
|
[複製連結]
狗仔卡
發表於 2011-11-27 17:24:53
