|
|
樓主 |
發表於 2008-10-1 23:42:26
|
顯示全部樓層
以下是今次新加的功能，
由於 AVP-A1HDCI & AVR-5308CI 是免費更新，
所以下面內容是來自成功更新的第一手用家資訊！
DENON Firmware Update for AVP-A1HDCI & AVR-5308CI - Free of Charge for the below new features (October 1st, 2008)
Notes:
1. Go to Firmware Update, not Add New Feature in the Options Menu, under Manual Setup
2. Unit settings will not be touched or reset
3. Update takes a little over 110 minutes
Firmware Update Details:
1. New Features Added:
a. Audyssey Dynamic Volume
i. Note: No Audyssey recalibration is needed after the update
ii. In Surround Parameters section you will see new menu item for Audyssey with selections for MultEQ, Dynamic EQ and Volume
iii. Dynamic Volume has 4 settings
1. Day/Evening/Midnight/Off
2. Each settings has different desired listening level, so Day mode will have a higher range, while midnight will have the least
b. Sirius Radio readiness
i. Need to get optional Sirius Home Connect Tuner (plus subscription) with RS-232C connector
2. Improvements to Unit Operation and GUI
a. Operation with new iPod/iTouch/iPhone models when used with optional ASD-11R dock
- Full audio and video output is now permitted with meta-data on GUI of AVP/AVR
b. Change the setting name of ‘2-way Remote’ in Option Setup menu – now reads ‘232C Port’
c. Better throughput of 1080p/24Hz signals via HDMI
i. More details to come on this
d. When power is turned off during Internet Radio playback, then powered back on,
unit will now properly return to previous state of Internet Radio playback
e. When using USB with Flash Drives of 4GB and higher, random playback is now permitted
f. When streaming files from a PC with Windows Vista, dropouts have been eliminated
g. Playback of JPEG files with meta-data is now permitted
h. Aspect ratio setting has been added for the Net/USB input
i. Input Source Selection via remote will now power on the unit
j. After power up, operation time for the unit to accept remote commands has been decreased
k. Subwoofer Channel output indicator in the Front Panel Display (FLD) has been removed when
custom settings for ‘Stereo/Direct’ have been set to ‘Speaker Large’, ‘Subwoofer Off’
l. The Surround Parameter settings of ‘SB CH Out’ can now be changed directly by pressing the ‘Standard’ button on the remote or front panel
i. This will toggle through the options for the playback mode of the Surround Back Channels when
listening to a 5.1 input source with a 7.1 channel setup– Matrix, Non-Matrix, PLIIx Cinema etc
m. New Volume Indicator settings for the GUI have been added
i. In Options Menu, under GUI, then Volume, the setting options are now: Bottom/Top/Off.
ii. Top setting will now display follow at the top of the display
[ 本帖最後由 wil-wil 於 2008-10-1 23:58 編輯 ] |
|
狗仔卡
發表於 2008-10-2 01:55:55
發表於 2008-10-4 14:21:29
